5
XMD1/XMD2
This unit has been designed specifically for playback of compact
discs bearing the
mark. No other discs can be played.
To remove the compact disc from its storage case, press down on
the center of the case and lift the disc out, holding it carefully by the
edges.
6. HANDLING COMPACT DISCS
Always handle the compact disc by the edges. Never touch the sur-
face.
To remove fingermarks and dust, use a soft cloth, and wipe in a
straight line from the center of the compact disc to the circumfer-
ence.
Note:
• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal
mechanism and damage the disc.
New discs may have some roughness around the edges. The unit
may not work or the sound may skip if such discs are used. Use a
ball-point pen, etc. to remove roughness from the edge of the disc.
Note on Compact Discs
Never stick labels on the surface of the compact disc or mark the
surface with a pencil or pen.
Do not use any solvents such as commercially available cleaners,
anti-static spray, or thinner to clean compact discs.
Do not use compact discs that have large scratches, are misshapen,
or cracked, etc. Use of such discs will cause misoperation or dam-
age.
Do not expose compact discs to direct sunlight or any heat source.
Proper way to hold
the compact disc
Removing the disc
No
Ball-point pen
Roughness
No
No
No
No
To Next Page
Loading...
Need help?
General
