Clark C50sD - Page 107

Planned Maintenance Intervals 7-11
Section 7. Planned Maintenance and Lubrication
NOTES:
* Air filter change interval may be determined by using an air
restriction indicator.
** Hydraulic filter change interval may be determined by hydraulic
filter restriction indicator.
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BCDE
Check truck for obvious damage and leaks.
Check fuel system for leaks, etc.
Check capacity, warning plates and decals.
Check condition of tires and wheels. Remove embedded
objects. Check air pressure.
Check for missing or loose wheel lugs nuts.
Check engine oil level.
Check engine coolant level (radiator and recovery tank)
Check transmission fluid level
Check fuel level.
Check hydraulic sump oil level.
Check gauges and instruments.
Check warning lights and hour meter.
Check overhead guard condition and bolts.
Check horn operation and other warning devices.
Check steering operation.
Check service brake operation.
Check parking brake operation.
Check parking brake linkage for damage, broken parts.
Check directional and speed controls operation.
Check accelerator and engine speed operation.
Check lift, tilt and aux. operation.
Check upright, lift chains and fasteners.
Check carriage or attachments and forks.
Check seat deck hold-down latch for correct locking.
Check optional safety equipment. (alarms, lights etc.)