C60-C80 8-7
Section 8. Specifications
Engine Coolant Recommendation
Use a mixture of 50% ethylene glycol permanent-type anti-freeze
containing rust and corrosion inhibitor only.
Note: This mixture provides anti-freeze protection level of -37°C
(-34°F), approximately.
Transmission Fluid Recommendation
Use CLARK Specification MS-276A CLARK Part number 2776236.
Hydraulic Fluid Recommendation
Use CLARK Specification MS-68 CLARK Part number 2776239
Hydraulic Oil, with anti-wear additives, or equivalent only.
Truck Weights
- with standard upright. [C60-75 : 3000mm, C80 : 2800mm MFH]
Gross Vehicle
Weight(kg[lbs])
Empty Vehicle
Weight (kg[lbs])
Loaded Drive
Axle (kg[lbs])
Empty Drive
Axle (kg[lbs])
Pneumatic Diesel
C60 15260[33642] 9260[20415] 13926[29313] 4050[8928]
C70 16630[36663] 9630[21230] 14717[32445] 3931[8666]
C75 17144[37796] 9644[21261] 15555[34292] 3998[8814]
C80 18360[40477] 10360[22840] 16186[35684] 4231[9327]
Pneumatic LPG
C60 15029[33133] 9029[19906] 13221[29147] 3976[8766]
C70 16399[36154] 9399[20721] 14642[32280] 3856[8501]
C75 17042[37571] 9542[21037] 15471[34108] 3914[8629]
To Next Page
Loading...
