Urea(SCR) System (C60-80D, Doosan Engine) 3-13
Section 3. Operator Compartment and Controls
How to fill urea solution
1) By using urea solution injector(at a gas station)
• Make sure that the engine is OFF.
• Engage the parking brake and open the
urea solution tank cover.
• Open the cap of the tank by turning it
counterclockwise.
• Make sure that the urea solution meets
the specifications of ISO 22241.
• Make sure that the urea solution does
not overflow.
Make sure that there is NO foreign substance while filling
the urea solution tank, including any additive and water.
Such foreign substance will gravely affect the forklift per-
formance and may cause a malfunction.
Make sure that the urea solution meets the specifications
of ISO 22241. Urea solution of poor quality will gravely
affect the forklift performance and may cause a malfunc-
tion.
• Turn the cap of the tank clockwise and close it completely. Wipe
the area around the cap with a clean cloth after filling the tank.
Any remaining urea solution will contaminate the forklift.
2) With a publicly available urea solution bottle
• Make sure that the engine is OFF.
• Engage the parking brake and open the
urea solution tank cover.
• Open the cap of the tank by turning it
counterclockwise.
• Make sure that the urea solution meets
the specifications of ISO 22241.
• Make sure that the urea solution does
not overflow.
To Next Page
Loading...
