Clark GCS 25 - Operator Maintenance; Daily Inspection

Specifications
Truck Specifications
Engine crankcase oil
Gasoline/LPG Engines
Transmission fluid
Powershift Transmission.
Torque Converter and
Drive Axle
Hydraulic fluid
Hydraulic Sump
Normal Application
Multi-purpose grease
Axle Ends, Wheel Bearings,
Steer Axle Linkage/Tie Rod
Ends, Steer Axle Knuckle
Bearings
Upright Mast Rollers,
Trunnion Bushings,
Tilt Cylinder Rod Ends
Chain lube
Upright Lift Chains
Dry-Film lubricant
Side Shifter, Attachments
Clamp Slides Bonded Lubricant,
Battery
(Unsealed-type)
Filters
Engine Fuel
Engine Oil
Engine Air
Transmission Oil
Hydraulic System Oil
Hydraulic Sump Breather
Brake Fluid
HR500/TA18
HR600
APICC/SEMH-Z104B,
MIL-45199B
(HR600) - TEXACO 8570 ATF
or Clark #962669
(HR500) - AMOCO 300 Motor Oil
SAE 20W
(TA18) AMOCO 1000
or TEXACO 1893 TDH
Clark Specification
MS-68
NLGI Grade No. 1
Lithium soap base grease,
Clark Specification MS-9B and
MS-107B, or equivalent.
MLGI Grade No.2
Lithium soap base grease,
Clark Specification
MS-107C, or equivalent.
Clark #886399 Chain and
Cable Lube, or equivalent.
Dow Corning Milykote 321
Graph-O-Kote
#220, Molub-Alloy #369 Dry
Lube, or equivalent.
Distilled Water.
Use Genuine Clark parts.
See your Clark dealer.
D.O.T 3 Brake Fluid
Trucks Hydraulic System Fluid.
9.4
( 1 Operator Maintenance
Daily Inspection
At the beginning of each
shift, fill out a daily
inspection sheet.
Do not make repairs your-
self. Lift truck mechanics
are trained professionals.
They know how to make
repairs safely.
1.1