Clark GCS 30 - Long & wide loads

Planned Maintenance and Lubrication
Engine Oil Level Check
Check the engine oil level at left side of
engine. Pull the dipstick out, wipe it
with a clean wiper and push it back into
the dipstick tube. Remove the dipstick
again and check the oil level.
Engine Oil and Filter Change
It is recommended to:
* • Drain and replace the engine crank-
case oil every 50 to 250 operating
hours.
• Replace the engine oil filter every
oil change.
'NOTICE — The time interval for changing
engine oil will depend upon your application
and operating conditions. To determine the
correct schedule for your truck, it is recom-
mended that you periodically submit engine
oil samples to a commercial laboratory for
analysis of the condition of the oil.
Engine Air Cleaner
Change the engine air filter every 50 to
250 operating hours, depending upon
your application and operating condi-
tions.
• STANDARD MODELS — Remove
and replace the complete air filter unit.
• CUSTOM AND INDUSTRIAL OP-
TION PACKAGE — Remove and
replace the filter element (shown).
84M362
8.6
3 Operating Hazards
This section shows hazards that may
cause you, or someone around you, to be
killed or badly hurt. As the operator, you
must look for other hazards. Get your boss
to help identify and avoid those hazards.
3.1