Section 5. Operating Procedures
Starting from a Safe Condition 5-3
Starting from a Safe Condition
Always start from a safe condition. Before operating a lift truck, make
sure that:
1. Parking brake is applied.
2. Forks are fully lowered to the floor or ground.
3. You are familiar with how all the controls function and have read
th
e Operator Manual.
4. All controls are in neutral or other correct position.
5. Truck has received its daily inspection and is ready and safe to
ope
rate.
Parking
Brake is Set
Forks are
Down
NEUTRAL
Position
FORWARD
REVERSE
Put the direction control lever
in the NEUTRAL position,
b
efore turning the key switch to
ON.
To Next Page
Loading...
