Pod Symbols and Functions 3-9
Section 3. Operator Compartment and Controls
Speed Limit System (Option)
Switch Operation Method and Description
The switch can be found on the right side of the instrument panel.
Use the switch when setting and changing the speed limit system.
Speed limit display
When setting the speed limit system to ON, the following is displayed
on the instrument panel:
• When the truck speed is 0.5km/h or more, the speed is displayed.
• When the truck speed is less than 0.5km/h, the operation time is
displayed.
※ Refer to the service manual or contact the CLARK dealer
for how to setting the speed limit value.
Switch 1 Red
Go to the submenu.
Change the setting and number.
Switch 2 Green
If pressed for less than 2 seconds : Cancel
If pressed for more than 2 seconds : Save
Switch 3 Black Move between menus. (Move to the right side.)
1.0
10.0km/h
0.5km/h or more Less than 0.5km/h
To Next Page
Loading...
