3-48 Operator Controls
Steering Column
The steering wheel can be tilted forwards
and backwards in small discrete
movements. Pull and hold lock, move the
wheel to the desired position and release
lock.
Hood Open
The hood release lever is located on the
left side of hood.
Hood Close
Actuate release (red collar) on gas spring
supporting hood and lower hood until latched.
Ground speed is controlled by the accelerator pedal only.
For safety reasons, your CLARK forklift truck is fitted with
a neutral start feature. The purpose of this is to prevent
the engine from being started while the transmission is in
gear. Thus the engine may only start when the direction
control lever is in the neutral position.
CAUTION
If the truck will start with the direction control in either
forward or reverse, there is a problem with the neutral
start switch and it must be repaired.
To Next Page
Loading...
