4
GENERAL SAFETY PRECAUTIONS
As with all machinery, there are certain hazards involved with its
operation and use. Exercising caution will reduce the risk of
personal injury.
WORK AREA
1. Keep the work area clean and well lit. Floors should always be kept clear.
Cluttered or dark areas invite accidents.
2. Keep children and bystanders away while operating machines.
Distractions can cause loss of control.
PERSONAL SAFETY
1. ALWAYS stay alert, watch what you are doing and use common sense
when operating this pump. Do not use the pump while you are tired or
under the influence of medication, drugs or alcohol. A moment of
inattention can result in personal injury.
2. Do not over-reach. Keep your proper footing and balance at all times
when positioning the pump.
3. NEVER direct the water discharge towards electrical wiring or equipment.
4. ALWAYS store the pump out of reach of children and do not allow persons
unfamiliar with these instructions to operate it.
5. NEVER direct the discharge flow towards another person.
6. ALWAYS thoroughly familiarise yourself with this pump & its operation, and
follow all instructions in this manual.
7. ALWAYS ensure that the pump is properly positioned to prevent it from
moving during operation, and that the immediate area surrounding the
pump is kept clear.
GENERAL EQUIPMENT USE AND CARE
WARNING: The BPT600 & BPT1200SS pumps are not submersible
pumps. On no account should they ever be immersed in water.
1. ALWAYS maintain the pump with care and keep it clean.
2. NEVER use this pump if any part is damaged. Have it inspected and
repaired by your local Clarke dealer.
3. NEVER modify this pump in any way. Use it ONLY for the purpose for which
it is designed.
4. NEVER run the pump dry. Always ensure the pump is filled or ready to be
filled with water before starting.
To Next Page
Loading...
Need help?
General
