Need help?Do you have a question about the Clarke CDM20 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| Display | LCD |
| Measurement Types | AC/DC Voltage, AC/DC Current, Resistance, Diode |
| AC Voltage Ranges | 200V, 750V |
| DC Voltage Ranges | 200mV, 20V, 200V, 1000V |
| AC Current Ranges | 200µA, 20mA, 200mA |
| DC Current Ranges | 200µA, 20mA, 200mA |
| Resistance Ranges | 200Ω, 20kΩ, 200kΩ |
| Battery Type | 9V |
Instructions for safe operation, including avoiding touching terminals, setting ranges, and handling live circuits.
Step-by-step guide on connecting leads and setting the rotary switch for voltage measurements, including overrange indication.
Instructions for connecting leads and setting the rotary switch for DC current measurements, noting lead placement for different current ranges.
Guide for connecting leads and setting the rotary switch for resistance measurements, including notes on overrange and in-circuit checks.
Table of ranges, accuracy, resolution, input impedance, and overload protection for DC voltage measurements.
Table of ranges, accuracy, resolution, input impedance, frequency range, and overload protection for AC voltage measurements.
Table of ranges, accuracy, resolution, max input current, and overload protection for DC current measurements.
To Next Page