EasyManuals Logo

Clarke Metalworker CBS45MD User Manual

Clarke Metalworker CBS45MD
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Electrical Connections
Connect the mains lead to a standard 230V (50Hz) electrical supply through an
approved 13Amp BS1363 plug, or a suitably fused isolator switch.
WARNING!
This Appliance must be Earthed!
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug proceed as follows:
Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter
E or Earth symbol “ ”or coloured GREEN or GREEN & YELLOW.
Connect BROWN coloured cord to plug terminal marked with a letter L or
coloured RED
Connect BLUE coloured cord to plug terminal marked with a letter N or coloured
BLACK
IMPORTANT:
If this appliance is fitted with a plug which is moulded on to the
electric cable (i.e. non- re-wireable) please note:
1. The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.
Fuse Rating
The fuse in the plug must be replaced with one of the same rating (13 amps)
and this replacement must be ASTA approved to BS1362.
IMPORTANT: If in any doubt, do not attempt any electrical repair yourself. Consult
a qualified technician
6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Metalworker CBS45MD and is the answer not in the manual?

Clarke Metalworker CBS45MD Specifications

General IconGeneral
BrandClarke
ModelMetalworker CBS45MD
CategorySaw
LanguageEnglish

Related product manuals