Clarke Metalworker CDP301B User Manual

0205SERIAL No....................

Clarke Metalworker CDP301B Specifications

General

Brand	Clarke
Model	Metalworker CDP301B
Category	Power Tool
Language	English

Summary

Introduction

General Safety Precautions

Additional Safety Rules for Drill Presses

Electrical Connections and Wiring

Preparation and Unpacking

Description of Parts

Assembly

Column and Base Assembly

Securing the column to the machine base.

Head Attachment and Guard Installation

Attaching the head assembly and installing the chuck guard.

Pulley Cover Knob Installation

Attaching the knob to the pulley cover.

Installation Procedures

Installing the Chuck

Step-by-step guide for fitting the drill chuck.

Fitting the Drive Belts

Process for installing and tensioning drive belts.

Settings and Adjustments

Table Settings and Tilt

Adjusting table height, swivel, and tilt angles.

Spindle Depth Setting

Setting the drilling depth limit using the collar.

Speed Adjustments

Changing Drill Speed

Procedure for adjusting spindle speed via belt configuration.

Operation

Maintenance and Care

Removing the Chuck

Instructions for safely detaching the chuck from the spindle.

Monthly Maintenance Checks

Routine checks for bolts, belts, and cleaning.

Lubrication and After Use Care

Lubrication points and post-operation cleaning.

Cutting Speeds Guide

Troubleshooting

Specifications

Optional Accessories

List of available optional attachments for the drill press.