Need help?Do you have a question about the Clarke Metalworker CMD300 and is the answer not in the manual?
General| Model | CMD300 |
|---|---|
| Category | Drill |
| Drill Type | Pillar Drill |
| Power Source | Electric |
| Voltage | 230V |
| Power | 350W |
| Chuck Size | 13mm |
| Speed Range | 5 speeds |
Ensures safe operation by maintaining a clean, well-lit, and hazard-free work area.
Guidelines for proper handling, inspection, and maintenance of power tools for safe operation.
Specific safety rules and warnings for operating the drilling function of the machine.
Essential protective clothing and gear to be worn for safe operation of the machinery.
Procedure for powering on, testing the machine, and selecting operating ranges.
Step-by-step instructions for setting up and performing drilling operations.
Guidance on milling techniques and how to install cutters for milling.
Instructions for using the micro feed adjustment for precise milling depth control.
Key considerations and best practices for performing milling operations safely and effectively.
Information on selecting appropriate cutting speeds for different materials and tools.
Procedure for adjusting and lubricating the machine slides to maintain accuracy and smooth operation.
Description and usage of the mill chuck set, including collet sizes.
Details of the 2-fluted HSS end mill set and compatible collet sizes.
Information on the MT3 collet set for use with HSS End Mills.
Specifications and details of the quick release vice accessory.
Description and usage of the indexable carbide end mill.
Explanation and example of how to use the clamp set for workholding.
To Next Page
