27
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SPECIFICATIONS
CLARKE International reserve the right to change specifications at any time
without prior notice
.
DUTY CYCLE
The duty cycle determines the machine ‘down time’. i.e 10% means 1 minutes
operation followed by 9 minutes of rest. The duty cycle must be adhered to
prevent the thermal cutout protection from activating
.
Do not exceed the stated duty cycle for this machine. Failure to heed this
warning may invalidate your warranty.
Model MIG 145
Part No 6014505
Weight 27.5 kg
Dimensions (l x w x h) mm 500 X 278 X 366
Power Supply 230 V @ 50Hz
IP Rating IP21S
Output Min/Max Amps 35 /135 Amps
Open Circuit Voltage 21 - 38 V DC
Rated Max Input Current (A) 33
Welding Capacity (Mild Steel) 4 mm (maximum)
MIG145
Duty Cycle (%) 10 35 100
Rated Welding Current (A) 135 72 40
Conventional Load Voltage (V) 20.75 17.6 16
To Next Page
