2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Please read these instructions carefully before operating the converter
Thank you for purchasing this CLARKE Single to 3 Phase Converter. i.e. to run 3-
phase asynchronous motors ONLY, from a 230V single phase supply.
Please note that this device, because of its characteristics is for use primarily
with constantly running motors. It is not desirable for use with stop start
operations.
Before using the device, please read this manual thoroughly and carefully
follow all instructions given. This is for your own safety and that of others around
you, and is also to help you achieve long and trouble free service from your
new product.
SPECIFICATIONS
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Dimensions (D x W x H) 365 x 255 x 380 mm
Weight 19.5 kg
Input Voltage 230V AC, ~ 50 - 60Hz,
Max input current 18 Amps
Input current fuse 20 Amps
Input cable size 1.5 mm
Output voltage 3ph 400VAC
Max output 3.5 HP
To Next Page
Loading...
