12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CONNECTING ELECTRICAL DEVICES
The generator can supply both 230V
AC and 115V AC.
The sockets are laid out in the
following order: (from left to right):
1 x 16amp 230v (Blue),1 x 16amp 115v
(Small Yellow) and 1 x 32amp 115v
(Large Yellow).
1. Connect the appliance to the
generator starting with the device
that draws the most current.
2. Select the voltage that you
require using the voltage selector
switch.
AC BREAKER
The AC Breaker will activate if the
generator
is overloaded. If the AC
Breaker activates,
1. Remove any connected devices
from the generator.
2. Wait for a few minutes.
3. Set the AC breaker to the ON (up)
po
sition.
To Next Page
Loading...
Need help?
General
