How to fix a Clarke POWER IG1000 generator that fails to start?
If your Clarke Inverter generator won't start, make sure the engine switch is set to ‘on’. Also, check the oil and fuel levels, adding more if necessary. If the issue persists, the spark plugs might be faulty and need replacement.
What to do if my Clarke POWER IG1000 Inverter generator fails to generate electricity?
If your Clarke Inverter generator isn't producing electricity, first ensure that the device you're trying to power is functioning correctly. If the overload indicator is illuminated, disconnect the appliance immediately and avoid connecting any appliance requiring more than 1 KVA. Also, if you are using the DC supply, check whether the DC Overload protector has activated, and if so, press the reset button.
General| Output Voltage | 230V |
|---|---|
| Frequency | 50Hz |
| Cooling | Forced air |
| Power Output | 1000W |
| Rated Output Power | 900W |
| Fuel Type | Petrol |
| Engine Type | 4-stroke |
| Efficiency | Unknown |
| Protection | Low oil level shut-down |
Details the 12-month guarantee against faulty manufacture and conditions of validity.
Provides contact information for obtaining parts and servicing for the generator.
Ensures safe operation by specifying ventilation, exhaust placement, and generator placement.
Outlines precautions during refuelling, including switching off the engine and avoiding flames.
Advises against wet conditions, wet hands, and emphasizes proper grounding for electrical safety.
Covers load limits, maintenance safety, and prohibitions on connecting to mains power.
Lists items to check for presence and condition after unpacking the generator.
Covers crucial steps like earthing, checking condition, cleanliness, and fuel system integrity.
Recommends using a funnel for refuelling to prevent spills and ensure adequate fuel.
Procedure for checking and topping up engine oil using the dipstick.
Provides instructions for checking the fuel level and advises against overfilling.
Specifies the type of gasoline required for the generator.
Instructions for cleaning or replacing the air filter element.
Step-by-step guide for starting the generator's engine.
Instructions for connecting appliances to AC and DC outlets safely.
Procedure for charging car batteries using the generator's DC output.
Explains the function of the economy control switch for fuel efficiency.
Describes the pilot and overload indicator lights and their meanings.
Steps for safely stopping the generator engine.
Guide for changing the engine oil, including capacity and recommended type.
Instructions for cleaning or replacing the air filter element.
Steps for checking, gapping, and replacing the spark plugs.
Procedure for inspecting and cleaning the fuel tank filter.
Common issues and their remedies for generator start-up and operation.
Contact details for acquiring parts and obtaining service support.
To Next Page
