EasyManuals Logo

Clarke POWER IG1000 User Manual

Clarke POWER IG1000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
MAINTENANCE
THE ENGINE OIL (EVERY 20 HOURS OF USE)
1. Remove the left side maintenance panel.
2.
Turn the oil filler cap anti-
clockwise and remove from the oil
tank, wipe the dipstick with a
clean clot
h.
3. Lift the generator and pour the oil
out of the oil reservoir
into a
suitable container
4.
Max Level
Min. Level
Fill the oil reservoir to the Max level
with fresh oil.
Oil Capacity (See
“Specifications” on page 23.)
We recommend the use of
SAE30 oil in this generator.
5. Replace the oil filler cap and
m
aintenance pa
nel.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of pollution is oil. Do not throw away used
engine oil in with your domestic trash or down drains and sinks. Place it in a
leak proof container and dispose of it according to local regulations.
CAUTION: PROLONGED EXPOSURE TO USED ENGINE OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED
ENGINE OIL.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke POWER IG1000 and is the answer not in the manual?

Clarke POWER IG1000 Specifications

General IconGeneral
BrandClarke
ModelPOWER IG1000
CategoryInverter
LanguageEnglish

Related product manuals