Name: Clarke POWER IG1000
Brand: Clarke
Rating: 5 (1 reviews)

To Next Page

To Previous Page

THE SPARK PLUGS (EVERY 50 HOURS OF USE)

1. Remove the top maintenance panel.

Remove the spark plug cap from

the spark plug.

3. Use a spark plug spanner

(supplied) to remove the spark

plug.

4. Check for discoloration and

remove any carbon build up.

5. Check the spark plug gap (a), it

should be between 0.6 and 0.7

mm, adjust if necessary.

6. Check the overall condition of the

spark plug and replace

damaged.

7. Reinstall the spark plug and

replace the spark plug cap.

CAUTION: ALLOW THE ENGINE TO COOL BEFORE REMOVING THE SPARK

PLUG.

Questions and Answers:

Need help?

Do you have a question about the Clarke POWER IG1000 and is the answer not in the manual?

Clarke POWER IG1000 Specifications

General