9435 Winnetka Avenue North • Brooklyn Park, MN 55445
Phone: 800.253.0367 • Fax: 800.825.2753
240 Superior Boulevard • Mississauga, Ontario, Canada L5T 2L2
Phone: 800.668.8400 • F a x: 8 0 0.26 3.5111
1. Check if the power cord is correctly
connected and check if the battery
is charged.
2. Restart the machine without
pressing the drive pedal.
3. Check floor inclination is not
exceeding specifications.
4. Check if the electromagnetic brake
is locking.
1. Check if there’s a brush motor
overload “WARNING ALARM F2”
on the display.
2. Check if the brush is correctly
installed and not worn out or
if there are external materials
preventing brush rotation.
3. Check if the green switch Led of
the One-Touch button is flashing.
Wait until the light is steady.
2. Open the recovery tank and check
to see if the debris tray and float
are clean and working.
3. Check if squeegee blades are
damaged or dirty.
4. Check to see if the lid gasket is in
good and working condition and
sealing when the lid is closed.
1. Check if the suction hose is
correctly installed and cleaned.
1. Check if you have the right
detergent and water settings.
2. Check if the solution valve is open. 3. Check to see if the solution filter
is clean.
4. Check to make sure the Chemical
Mixing System is clean. Eventually
purge the system.
The machine
doesn’t work
as it should?
The suction
doesn’t work
as it should?
The machine
doesn’t clean
as it should?
The brush
doesn’t work
as it should?
ATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
Troubleshooting
RA40
™
To Previous Page
Loading...
Need help?
General