EasyManua.ls Logo

Clarke Vantage 17 E User Manual

Clarke Vantage 17 E
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Vantage 17 E
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
EN
ES
FR
Form No. 9099653000 - 07/2012
English (1 - 22)
Español (23 - 44)
Français (45 - 66)
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before using it. If your operator(s)
cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operators position at the rear of the machine.
Instructions For Use - Original Instructions / Instrucciones de uso / Mode d’ emploi
Model: 9087316020
9099653000 - 07-2012.indb 1 24-Jul-12 15:17:38

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Clarke Vantage 17 E and is the answer not in the manual?

Clarke Vantage 17 E Specifications

General IconGeneral
BrandClarke
ModelVantage 17 E
CategoryScrubber
LanguageEnglish

Summary

Introduction and Manual Guidance

Manual Purpose, Target Audience, and Conventions

Explains the manual's scope, intended users, and directional definitions for clarity.

Identification, References, and Policies

Covers machine identification, other manuals, spare parts policy, and changes.

Operation Capabilities

Defines the machine's use for cleaning smooth, solid floors; excludes carpets.

Safety and Handling Precautions

Unpacking, Delivery, and General Safety

Instructions for unpacking, checking delivery, and general safety warnings.

Safety Symbols and Instructions

Explains symbols used in the manual and provides critical safety advice.

120 VAC Grounding Instructions

Details grounding requirements and proper use of extension cords for 120V systems.

Machine Description and Components

Machine Structure Components

Lists and illustrates the main physical parts of the machine.

Handlebar and Control Panel

Identifies and describes the controls and indicators on the handlebar.

Accessories and Options

Lists available optional accessories that can be fitted to the machine.

Technical Data and Wiring

Technical Specifications

Provides detailed technical specifications and performance data for the machine.

Wiring Diagram and Grounding

Illustrates electrical connections, components, and grounding requirements.

Operation and Usage Guidelines

Pre-Operation Setup

Steps for installing brushes/pads, squeegee, and filling the solution tank.

Machine Start, Stop, and Operation

Guides for starting, stopping, and performing scrubbing/drying operations.

Machine Movement and Parking

Procedures for transporting, parking, and lifting the squeegee.

Post-Operation and Storage

Steps after use, tank emptying, and guidelines for long-term storage.

Maintenance and Servicing

Scheduled Maintenance Table

A table outlining periodic maintenance tasks and their recommended intervals.

Component Cleaning and Replacement

Instructions for cleaning and replacing squeegees, brushes, filters, and tanks.

Troubleshooting and Scrapping

Troubleshooting Common Issues

Lists common problems, their possible causes, and recommended remedies.

Machine Scrapping Procedure

Guidelines for proper disposal and material separation of the machine.

Parts List and Diagrams

System Components Breakdown

Lists parts for General, Solution, Filter, Wheels, Recovery, Handle, Squeegee, Brush, and Wiring systems.

Accessories List

Lists various optional accessories like brushes and pads available for the machine.

Related product manuals