Clarke Vantage 17 Battery User Manual

Form No. 909 6772 000 - 06/2008
Vantage 17 Battery
Operator’s Manual
Manuel d’utilisation
Libro de Instrucciones
EN
ES
FR
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
English (3 - 24)
Español (25 - 47)
Français (48 - 70)
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
machine could result in injury to you or to other personnel; damage to the machine or to other
property could occur as well. You must have training in the operation of this machine before using it.
If your operator(s) cannot read this manual, have it explained fully before attempting to operate this
machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: Clarke®, 2100 Highway 265, Springdale, Arkansas 72764.

Clarke Vantage 17 Battery Specifications

General

Brush Motor	0.75 HP
Vacuum Motor	0.5 HP
Cleaning Path	17 inches
Power Source	Battery
Battery Type	Lead Acid
Battery Voltage	24 V
Solution Tank Capacity	17 gallons
Machine Width	20 inches
Battery Dimensions	13 x 6.8 x 9.4 inches

Summary

Safety and Introduction

Safety Symbol Definitions

Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.

General Operational Safety Guidelines

Covers essential safety rules for operation, maintenance, and handling of the machine.

Machine Usage and Environmental Limits

Specifies safe operating temperatures, humidity, and environmental protection requirements.

Introduction to the Clarke Vantage 17 Battery

Introduces the machine and provides guidance on handling the operator's manual.

Machine Setup and Operation

Machine Specifications Overview

Comprehensive list of technical details for the Vantage 17 Battery machine.

Transport Procedures

Steps for safely loading, unloading, and securing the machine for transport.

Machine Description

Identifies external and internal components of the machine.

Control Panel Functions

Describes indicators and switches on the control panel and their operations.

Battery Management and Charging

Covers battery checks, installation, setting, and charging procedures.

Pre-Operation Setup

Procedures for installing squeegee, filling solution tank, and installing brush/pad.

Machine Start, Stop, and Operation

Step-by-step guides for starting, stopping, and operating the machine.

Tank Emptying Procedures

Procedures for emptying the recovery and solution tanks.

Maintenance and Troubleshooting

Post-Operation Care and Storage

Procedures for cleaning the machine after use and long-term storage.

Maintenance Schedule and Procedures

Outlines the recommended maintenance schedule and common procedures.

Cleaning Procedures

Detailed steps for cleaning the squeegee, brush, tanks, and solution filter.

Battery Charging and Fuse Replacement

Instructions for charging batteries and checking/replacing fuses.

Accessories and Troubleshooting

Lists optional accessories and provides a guide for solving common machine problems.

Parts, Diagrams, and Support

Comprehensive Parts Lists and Diagrams

Illustrated breakdowns and part numbers for major machine systems and accessories.

Wiring Diagrams

Electrical circuit diagrams for different machine serial number ranges.

Product Support and Warranty Information

Contact information for support branches and details of the product warranty.