3
CONTENTS
Introduction ............................................................................................ 2
Guarantee .............................................................................................. 2
Environmental Protection ...................................................................... 2
Parts & Service Contacts ....................................................................... 2
Table of Contents ................................................................................... 3
Description ............................................................................................. 3
General Safety Precautions .................................................................. 4
Electrical Connections .......................................................................... 6
Preparation for Use ................................................................................ 7
Maintenance ........................................................................................ 10
Troubleshooting .................................................................................... 11
Parts Lists and Diagrams ..................................................................... 13
Technical Specification ....................................................................... 17
Declarations of Conformity ................................................................ 18
DESCRIPTION
The SPE800 and SPE1200SS are centrifugal, horizontal electric pumps with a
self-priming capability and venturi system, suitable for pumping water from a
depth of up to 8 m.
They are designed to operate with clean water only, at a max temp of 35°C.
Operating with contaminated or salt water should be avoided. The pump
inlet is higher than the impeller inlet so that it can start operating when only
the pump body is filled with water.
Upon receipt, any damage or deficiency should be reported to your CLARKE
dealer immediately.
To Next Page
Loading...
Need help?
General
