5
4. NEVER run the pump dry. Always ensure the pump is filled or ready to be
filled with water before starting.
5. NEVER overtighten drain or filler plugs. Excessive force may damage the
threads and make the plug difficult to remove in future.
6. ALWAYS ensure the pump is in a horizontal position and is firmly anchored
via its fixing screws to a level surface.
7. NEVER use for pumping flammable liquids or corrosive chemicals. These
pumps are designed to pump WATER ONLY.
8. ALWAYS use a strainer connected to the suction (inlet) hose, to prevent
stones and other debris from being drawn up, which could cause severe
damage to the pump.
SERVICING
1. ALWAYS have the pump serviced by your local CLARKE dealer, using only
identical replacement parts. This will ensure the safety of the pump is
maintained. The use of non standard parts could be hazardous.
2. NEVER attempt any repairs yourself. If you have a problem with this
product contact your local CLARKE dealer.
Your CLARKE water pump has been designed to give long and trouble free
service. If, however, having followed the instructions in this booklet carefully,
you encounter problems, take the unit to your local CLARKE dealer.
To Next Page
Loading...
Need help?
General
