10
English
8. Settings
1. Press and hold in [MEM] (2) for two seconds to enter the settings mode.
Hours flashes.
2. Set the desired hour using [MEM] (2); press [TALK] (4) to confirm. Minutes
flashes, continue in the same way and set: Minutes, year month, day and
finally activate (on) or deactivate (off) the power save mode. An audible
signal is emitted when a setting is saved.
3. Hold in [MEM] (2) to change settings quicker. 30 seconds after the last
button was pressed the display reverts to time mode.
8.1 Turning off the voice function
• You can temporarily turn off the voice function by pressing any of the
buttons whilst the voice is speaking.
• How to shut the voice function off: Press and hold in [TALK] (4) for two
seconds to alternate between activation and deactivation of the voice
function (the loudspeaker symbol is not displayed).