Clas Ohlson talk th1091 - 6. Use; Taking Ear Temperature; Taking Forehead Temperature

8
English
9
6. Use
6.1 Taking temperatures
A. Taking the temperature in the ear
1. Remove the forehead adapter (if it is fitted). Make sure that the sensor is clean.
2. Carefully insert the sensor into the ear canal. Stop immediately if it is painful.
3. Press any of the buttons once to activate the thermometer.
4. Press the measuring button [=] (3) once. A single beep will
be emitted when measurement commences and a double
beep will be emitted when the measurement is completed.
The reading will appear on the display and a voice will
deliver an audible reading.
Example: The temperature is 37.2 °C, taken in the ear.
The voice function is turned off and the battery is low.
5. The reading is automatically saved into the memory. Push
[MEM] (2) if you wish to view the reading again.
6. After approx. 3 minutes the display will revert to displaying
the time and after a short while the thermometer will shut
itself off automatically.
B. Taking the temperature of the forehead
1. Attach the forehead adapter (if it is not already attached)
to the thermometer (it only fits on one way). Make sure
that the sensor is clean.
2. Place the thermometer against the forehead between the
hairline and eyebrow.
3. Press any of the buttons once to activate the thermometer.
4. Press the measuring button [=] (3) once. A single beep will
be emitted when measurement commences and a double
beep will be emitted when the measurement is completed.
The reading will appear on the display and a voice will
deliver an audible reading.
Example: The temperature is 36.5 °C, taken on the
forehead and the voice function is activated.
5. The reading is automatically saved into the memory. Push
[MEM] (2) if you wish to view the reading again.
6. After approx. 3 minutes the display will revert to displaying
the time and after a short while the thermometer will shut
itself off automatically.