Need help?Do you have a question about the Classeq ECO 3 and is the answer not in the manual?
General| Brand | Classeq |
|---|---|
| Model | ECO 3 |
| Category | Dishwasher |
| Language | English |
Warning against potential serious or fatal injuries.
Warning against potential minor injuries or material damage.
Warning against defects or product destruction.
Refers to a chapter with more detailed information.
Refer to footnote at bottom of page.
Indicates an item is recyclable.
Identifies key physical components and their locations on the machine.
Details the buttons, lamps, and indicators on the machine's control panel.
Lists items supplied with the machine, such as baskets, filters, and hoses.
Provides detailed dimensions, capacities, and operating parameters for various models.
Outlines essential safety guidelines for operation and general use.
Highlights specific warnings like not standing on the door or using extension leads.
Instructions for checking the machine for damage after unpacking.
Guidance on machine placement, stability, and servicing clearance.
Advice on ensuring water inlet and drain hoses are correctly routed and not kinked.
Specifies required electrical standards like RCD and isolator switch compliance.
Explains the importance and procedure for earth bonding for safety.
Details requirements for mains plugs and electrical supply cables.
Lists required cable types and specifications for different machine ratings.
Outlines necessary water supply conditions, including temperature and pressure.
Instructions for connecting the water supply hose to the machine and mains.
Lists the tools suggested for installation.
Details how to connect the machine to the mains electricity supply.
Instructions for connecting the water supply hose to the machine and mains.
Instructions for connecting the drain hose to the waste plumbing system.
Specific instructions for connecting drain hoses for gravity drain systems.
Instructions for connecting drain hoses for machines with drain pumps.
Guide on attaching weights and filters to chemical dispensing tubes.
Instructions for setting up and filling the integral water softener with salt.
Procedure for priming rinse aid and detergent pumps.
Notes that chemical pumps are pre-set but can be adjusted.
Brief overview of the machine's design differences from domestic units.
Familiarization with the fascia controls and isolators before operation.
Steps to turn on the machine using the fascia controls.
Importance of allowing the machine to heat up before the first wash cycle.
Instructions on loading baskets and initiating a wash cycle.
How the machine automatically drains excess water during operation.
Steps to turn off and drain gravity drain machines.
Steps to turn off and drain machines equipped with a drain pump.
Warnings against using high-pressure cleaners or submerging the machine.
Steps to take before cleaning, including draining and power disconnection.
Detailed steps for cleaning the internal components of the machine.
Instructions for cleaning the external surfaces of the machine.
Advice on using soft water and dealing with lime scale build-up.
Initial checks to perform before contacting service personnel.
Troubleshooting steps for when the machine fails to fill with water.
Steps to resolve problems with the rinsing function.
Steps to diagnose and fix slow water filling issues.
Steps to resolve issues where the machine is not heating correctly.
Steps to resolve problems with the machine not draining properly.
Steps to address issues with unsatisfactory wash results.
Steps to resolve issues where the machine is overfilling.
Steps to resolve excessive foaming in the wash water.
Steps to diagnose why the machine will not turn on.
Steps to take if the machine cannot be turned off.
Guidelines for safely removing and decommissioning the machine.
Details on how the integral water softener functions and its maintenance.
Step-by-step instructions for refilling the salt reservoir.
Information and procedures for altering the machine's electrical rating.
How to adjust the dosage rates for rinse aid and detergent.
Instructions for performing de-scaling of the wash tank.
A map illustrating water hardness levels across different regions.
Details the terms of the warranty, including covered faults and exceptions.
Provides contact details for customer support and service.
To Next Page
