Do you have a question about the Classeq ECO 2 and is the answer not in the manual?
Brand | Classeq |
---|---|
Model | ECO 2 |
Category | Dishwasher |
Language | English |
Explains the controls and indicators on the machine's fascia panel.
Covers operating voltage, installer responsibilities, heating, detergents, extension leads, door safety, lime scale, children, and disconnection.
Specific safety advice for dishwashers, cutlery placement, and food debris removal before washing.
Steps for unpacking, checking for damage, and disposing of packaging.
Details mains supply requirements, electrical connection standards, and cable specifications.
Covers changing electrical rating and connecting the water supply hose.
Details water supply restrictions and guidance on drain/waste water hose connection.
Lists recommended tools and provides instructions for electrical supply connection.
Details connecting the water supply hose and drain hose for different machine types.
Installing chemical bottle weights for rinse aid and detergent.
Instructions for checking water hardness and setting the integral water softener.
Procedures for priming rinse aid/detergent and adjusting chemical dosage.
Information on pre-set rinse and wash tank temperatures and checking them.
Description of the machine and its fascia controls.
How to switch on, heat up, and start a wash cycle.
Instructions for draining the machine at the end of the day for gravity drain types.
Specific steps for draining drain pump machines at the end of the day.
Steps before cleaning, and detailed instructions for cleaning the machine's interior.
How to clean the exterior and manage lime scale issues.
Initial checks and troubleshooting for filling and cycle start issues.
Troubleshooting for rinsing, slow filling, heating, draining, and poor wash results.
Troubleshooting for overfilling, foaming, power issues, and inability to turn off.
Detailed steps for safely removing and decommissioning the machine.
Detailed information on the integral water softener and its operation.
Instructions for refilling the salt reservoir with granulated salt.
Detailed instructions and safety warnings for changing the machine's electrical rating.
Instructions for adjusting the rinse aid and detergent dosing pump settings.
Instructions for de-scaling the wash tank and rinse boiler.
A map indicating water hardness levels across regions for reference.
Details the parts and labour warranty terms and lists exceptions due to misuse.
Provides useful contact details for support and service.