Need help?Do you have a question about the Classeq G400 DUO WS and is the answer not in the manual?
General| Rinse Temperature | 70°C |
|---|---|
| Drainage | Gravity drain |
| Material | Stainless steel |
| Power Supply | 220-240V, 50Hz |
| Water pressure required | 2 to 4 bar |
Meanings of danger, warning, caution, and recycle symbols.
Critical safety warnings and cautions for machine operation.
Overview of LED and LCD interface for commissioning and service.
Steps to enter and use the machine's commissioning mode.
Instructions for adjusting rinse aid and detergent dosage.
Procedure for filling and priming detergent and rinse aid pumps.
Steps to commission the integral water softener unit.
Guide to setting water hardness based on supply analysis.
Steps to enter and navigate the machine's service mode.
Explanation of program values and sensor readings in service mode.
Configuration options for wash and rinse interlock parameters.
To Next Page
