Need help?Do you have a question about the Classeq DUO 400 and is the answer not in the manual?
General| Brand | Classeq |
|---|---|
| Model | DUO 400 |
| Category | Dishwasher |
| Language | English |
Identifies and describes the controls and indicators on the machine's front panel.
Lists all items included with the machine upon delivery.
Provides detailed physical and operational specifications for different models.
Details the electrical connections and requirements for the machine.
Specifies the electrical standards and safety measures for connection.
Explains the importance and method of earth bonding for safety.
Information on different types of electrical plugs that may be supplied with the machine.
Details the specifications for the mains electrical supply cable.
Procedure for changing the machine's electrical rating by a qualified engineer.
Guidelines for connecting the machine to the water supply.
Details on the specific water supply hose and its connection requirements.
Specifies the acceptable limits for incoming water temperature and pressure.
Guidance on connecting the machine's drain hose to the waste system.
Lists the tools recommended for assisting with machine installation.
Instructions for connecting the machine to the mains electrical supply.
Steps for correctly connecting the water supply hose to the machine.
Guidance on how to connect the drain hose to the waste plumbing.
Specific instructions for connecting drain hoses on gravity drain models.
Specific instructions for connecting drain hoses on drain pump models.
Procedure for installing chemical bottle weights and filters.
Instructions for setting up and filling the integral water softener.
Steps to prime the rinse aid and detergent pumps.
Information on pre-set chemical pump dosing rates and adjustments.
Notes on pre-set temperatures and recommendations for checking them.
Overview of the machine's design for commercial use.
Familiarisation with the machine's front fascia controls and isolators.
Step-by-step guide on how to turn the machine on.
Guidance on allowing the machine to heat up before the first wash.
Instructions for loading baskets and starting a wash cycle.
Procedures for draining the machine at the end of the day.
Specific draining steps for gravity drain models.
Specific draining steps for drain pump models.
Pre-cleaning checks, including draining and power disconnection.
Detailed steps for cleaning the internal components of the machine.
Instructions for cleaning the external surfaces of the machine.
Information on water hardness and preventing lime scale build-up.
Steps to diagnose and resolve issues with the machine not filling.
Troubleshooting steps when the wash cycle fails to initiate.
Steps to diagnose and resolve issues with the machine not rinsing.
Troubleshooting steps for when the machine fills at a slow rate.
Steps to diagnose and resolve issues with the machine not heating.
Troubleshooting steps for when the machine fails to drain.
Causes and solutions for unsatisfactory wash results.
Steps to diagnose and resolve issues with the machine overfilling.
Troubleshooting steps for excessive foaming in the wash water.
Steps to diagnose and resolve issues with the machine not powering on.
Steps to diagnose and resolve issues with the machine not powering off.
Detailed information and procedure for the integral water softener.
Instructions for refilling the salt reservoir of the water softener.
Instructions for changing the machine's electrical rating.
Procedure for changing electrical rating to 220-240V / 1N~ / 13A.
Procedure for changing electrical rating to 220-240V / 1N~ / 20A.
Procedure for changing electrical rating to 380-415V / 3N~ / 13A.
Guide to adjusting rinse aid and detergent dosing pump settings.
Instructions for de-scaling the wash tank of the machine.
Information on how to contact support and the website address.
To Next Page
