www.tsicustomerservice.comA408
4
INSTALLATION INSTRUCTIONS
Tools Required for Assembly
Leg Assembly
1
2
3
Align the 2 mounting tabs into the
bracket.
Slide the legs outward to lock in
place. When locked in position
the screw hole from step 3 will be
aligned.
Fasten the legs to the base using
the included screws,1 per leg
Phillips Head Screwdriver
CARE AND MAINTENANCE
Clearance To Combustibles
Keep electrical cords, drapery, furniture and other combustibles at least 3 (0.9 m) from the front of the heater
and away from the sides.
Cleaning Trim
Clean the metal trim using a so cloth, slightly dampened with a citrus oil-based product and bu with a so,
clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Purchase citrus oil-based products at a hardware store.
To Next Page
Loading...
