www.tsicustomerservice.comA408
6
OPERATION INSTRUCTIONS
Function
POWER
Use the power button to turn on or o the stove from the
remote or control panel.
Use the + and - buttons to adjust the ame brightness.
ere are 7 brightness,6 is brightest and 1 is dimmest.When
the ame button is pressed ,the corresponding indicator will
ash six times then fade o.
Press the HEAT button to cycle through 1000W,
1500W and OFF settings.
If using the remote control, please note that the heater will
beep once when set on 1000W and beep twice when set on
1500W, when press the button third times, it will be o.
FLAME
HEATER
Icon
Description
To Next Page
Loading...
