Do you have a question about the Clay Paky ALPHA SPOT HPE 300 and is the answer not in the manual?
Safety instructions for mounting the projector correctly.
Guidelines on minimum distances from flammable materials.
Precautions and requirements for electrical connections.
Safety measures to follow before and during maintenance.
Details the items provided in the product packaging.
Procedure to lock and unlock the Pan movement.
Procedure to lock and unlock the Tilt movement.
Instructions for mounting the projector on various surfaces.
Steps for connecting the projector to the electrical power supply.
Instructions for connecting the DMX control signal cable.
Steps for powering on the projector and initial display sequence.
Explains the status indicated by the DMX, TX, and SEL LEDs.
How to invert the display screen orientation.
Procedure to set the initial DMX address for the projector.
Method to display short descriptions for menu items.
How to set addresses and options without mains power.
Outline of the available settings within the Options Menu.
Outline of the available information within the Informations Menu.
Outline of the available functions within the Test Functions Menu.
Outline of the available functions within the Service Menu.
Step-by-step guide to navigating and using the projector's main menus.
Instructions for accessing and utilizing the Service Menu.
Option to reverse the direction of Pan movement.
Option to reverse the direction of Tilt movement.
Function to swap Pan and Tilt channel assignments.
Allows selection of channel arrangement from two available modes.
Option to reverse the CMY color mixing system.
Enables linear movement of the color disc.
Restricts color disc positioning to solid colors only.
Enables the rainbow effect for continuous color disc rotation.
Dims the lamp automatically during color changes.
Automatically closes strobe when dimmer is fully closed.
Automatically closes dimmer when strobe is fully closed.
Dims the lamp automatically during gobo changes.
Selects how the lamp turns on (Power up, Delay, Auto DMX).
Enables remote control of the lamp via DMX channel.
Option to enable or disable Pan and Tilt encoders.
Closes stop/strobe automatically in case of Pan/Tilt position error.
Saves current DMX channel levels for manual control.
Sets the display to always show maximum brightness.
Automatically turns off the display after a period of inactivity.
Allows saving four different configurations of menu settings.
Restores all options menu items to their default values.
Displays total and partial operating hours of the projector.
Displays total and partial operating hours of the lamp.
Counts the total and partial number of times the lamp was turned on.
Shows the software and hardware versions of the projector's boards.
Displays the status (On/Off) of effect sensors.
Displays the level of the projector's DMX channels.
Performs a reset operation on the projector.
Allows turning the lamp on or off from the control panel.
Sets channel levels manually from the control panel.
Displays the current position of the Pan encoder.
Displays the current position of the Tilt encoder.
Checks the proper functioning of the projector's effects.
Adjusts mechanical settings for uniform projector performance.
Restores default values for Pan (128) and Tilt (128).
Details how DMX channels are mapped in different modalities.
Instructions for locking and releasing the Pan and Tilt movements.
Procedures for opening and closing the projector's side covers.
Steps for opening the lamp compartment and replacing the lamp.
How to adjust and centre the lamp for optimal performance.
Resets partial operating hours and lamp strike counts.
Instructions for replacing fixed gobos on the wheels.
Procedure for replacing the bearing group.
Instructions for replacing rotating gobos on the wheels.
Guidelines for regular cleaning of parts subject to dust and grease.
Recommended operations for annual maintenance by qualified technicians.
Detailed steps for removing the effect modules from the projector.
Instructions for reinstalling effect modules in reverse order of extraction.
Available power supplies and power consumption details.
Specifications for the lamp, motors, and optical unit.
Details on movable body movement, IP rating, CE marking, and safety devices.
Information on the projector's body, working position, weights, and dimensions.
Addresses issues related to the projector failing to power up or electronic faults.
Covers problems related to projection quality or reduced light output.
| Brand | Clay Paky |
|---|---|
| Model | ALPHA SPOT HPE 300 |
| Category | Lighting Equipment |
| Language | English |









Loading...