Clean Cut CC3100 - Unit Parts; Mounting Parts; You will also Need

5
UNIT PARTS:
1. Mounting Holes
2. Mounting Bracket
3. LED Sensor Windows
4. Cut Zone
5. Dispense Zone
6. Opening Latch
7. Viewing Window
8. Main Body
9. Dowel Rod
10. Dowel Rod Guide
11. Power Cord Connector
12. Power Adapter (exact model
varies by country)
13. Paper Roller
14. Insertion Slot (space between
paper roller and pinch rollers)
15. Pinch Rollers (Inside)
16. Power Jack
17. Cord Management Hooks
MOUNTING PARTS:
A. 12 Screws
4 1”
4 1 1/2”
4 2 1/4”
B. 4 Washers
C. 16 Spacers
4 1/2”
4 1/4”
4 3/16”
4 1/16”
D. Mounting Template (in box)
YOU WILL ALSO NEED:
• Tape
• Ruler (or you may cut out the
ruler provided on the template)
• Electric drill with a 1/4” drill bit
• Phillips-head screwdriver