14
❐ The device may only be used when the lters are in place. Damaged lters must be
immediately replaced. In such a case, please contact our customer service team.
❐ Make sure that the lter is dry before you put it back in the device.
❐ Do not insert any objects in the device openings. Never operate the device if the
openings are blocked.
❐ Before using the vacuum cleaner, remove any larger, sharp, and pointy objects from
the surface you intend to clean. They could damage the lter.
❐ Do not vacuum up rock dust, cement, drill dust etc. It could block or damage the
lter.
❐ Do not attempt to grease the wheels with a lubricant or oil. Otherwise dust or dirt
will stick to the wheels.
❐ Never submerge the device in water or other liquids! Ensure that the device, cord
or plug do not fall in water or are at risk of getting wet. If the device falls in water,
immediately disconnect the power supply.
❐ Never touch the device, the cord or the plug with wet hands.
❐ Do not use any additional accessories.
❐ Do not cover the vents!
❐ Do not leave the device on when unattended.
❐ Do not allow the device to fall and do not subject it to strong percussions.
Cleaning
❐ Before cleaning, always disconnect the mains plug and let the device cool off.
❐ Never submerge the device, the mains cord, and the plug in water.
❐ Do not use any aggressive or abrasive cleaning agents. Do not use any metallic
objects.
❐ Clean and/or change the lters at the recommended intervals.
Warranty conditions
All defects caused by improper treatment, damage, limescale build-up or repair attempts
are excluded from the guarantee. This also applies to normal wear and tear of the individual
components.
02274_DE-GB-FR-NL_V2.indd 14 09.03.10 10:00
To Next Page
Loading...
Need help?
General
