17
5. Dry off the dust bin and dust lter with a soft cloth.
6. Place the dust lter back in the dust bin.
7. Put the dust bin back in the device.
❐ Make sure that both the dust bin and dust lter are dry before you
put them back into the device!
Change the dust lter every 12–18 months if you use the device at the cleaning
intervals we recommend. For this, please contact our customer service
department(see the section “Customer service”).
Changing the microlter
❐ Before changing, pull the plug out of the socket and let the device
cool off.
1. Unscrew the screw on the microlter cover and remove the cover (Note: Cover and
microlter are connected with one another).
2. Set the new microlter cover with the lter in the device and screw tighten the screw.
❐ Dispose of the old microlter at a recycling depot.
Change the dust lter every 12–18 months if you use the device at the cleaning
intervals we recommend. For this, please contact our customer service department
(see the section “Customer service”).
Cleaning the UV-C sterilisation light
❐ Before cleaning, pull the plug out of the socket and let the device
cool off.
1. Unscrew the 7 screws for the UV-C light cover and take off the cover.
2. Polish the glass cover of the UV-C sterilisation light with a dust rag.
3. Screw tighten the cover.
Change the UV-C sterilisation light every 1 to 2 years if you use the device at the
cleaning intervals we recommend. For this, please contact our customer service
department (see the section “Customer service”).
02274_DE-GB-FR-NL_V2.indd 17 09.03.10 10:00
To Next Page
Loading...
Need help?
General
