19
❐ Switch the device off immediately and pull the mains plug from the mains socket
– if you stop working with the device for a period of time,
– if you are no longer using the device,
– before you change the nozzles,
– if a fault or error occurs while the device is in operation,
– if liquids or foreign bodies have found their way into the device,
– before a thunderstorm,
– before you clean parts of the device and accessories.
❐ The device must be switched off when inserting or removing the mains plug.
❐ Always pull the plug and never the cable!
❐ Never pull the device by the cable to move it. Use the handle.
❐ Do not try to lubricate the rollers with lubricant or oil. This would cause dust and dirt
to increasingly adhere to the rollers.
❐ Note the MAX marking on the dust container. If the marking is reached during use,
empty the dust container before you carry on vacuum cleaning.
❐ Empty the dust container after each use. The fi lters must also be regularly cleaned in
order to prevent overloading of the motor.
❐ The dust container and the fi lters must be completely dry before you insert them
again and use or store away the device.
❐ Store the device in a dry place that is not accessible to children and animals when it
is not being used.
To Next Page
Loading...
