22
Inserting the Telescopic Tube
1. Insert the curved end of the suction hose into the larger opening
of the telescopic tube. To ease insertion, twist the tube slightly
back and forth.
2. Insert the other end of the telescopic tube into the desired
nozzle.
Adjusting the Length of the Telescopic Tube
1. Press the slide (A) on the telescopic tube downwards and
adjust the tube to the desired length.
2. Release the slide and move the tube slightly up or down until
it engages.
Accessories
CAUTION!
❐ Always switch off the vacuum cleaner fi rst before changing the nozzles.
The nozzles can be attached either to the telescopic tube or directly to the
handle.
Floor Nozzle
The fl oor nozzle is suitable for both carpets and hard fl oors.
The foot switch (B) allows you to change between carpet and hard
fl oor. A brush and a rubber lip are extended on the underside of the
nozzle for use on hard fl oors.
A
B
To Next Page
Loading...
