9
Loading Contents to the Screen
Step 1
• Turn the Battery Isolation Switch ON (located on the side of the Battery Unit).
• Press the ON/OFF button on the control panel (located on the top of the Display Unit).
Step 2
• On a computer, copy the contents (images, videos) you wish to display to a ashdrive, ensure
they are supported by the unit, and they are stored in the root directory of the ash drive (without
putting them into a folder).
Step 3
• Insert the ash drive into the USB port at the back of the display.
• Follow instructions on the screen, the screen should indicate how many les are copied onto
the unit. Please note that all les currently stored in the unit will be deleted.
• Once completed, the screen will reboot and play the stored les in a loop.
• Remove the ash drive.
To Previous Page
Loading...