10
Determine the Test Window
That’s Best for You
Testing Window example: It is easy to set a
Testing Window that is convenient for you.
For example, if you set the m Button at 9:00
a.m., you will be able to test anytime between
6:00 a.m. and 12:00 noon for that cycle.
Please Note: Once you have set your m button and you are past day 5, you cannot
change your “Test Window” when traveling to a different time zone. If you need
help determining when to test, call the Helpline.
1. Y
ou can start using the Clearblue® Easy Fertility Monitor on the first day of your
next cycle, but not before.The first thing to do is to set the m Button.
2. When you press the m Button you:
• Tell your Monitor that your period has started and a new cycle has begun.
• Establish the 6 hours each day during which you can do a test.This is called the
Testing Window.The Clearblue® Easy Fertility Monitor should be set so that it is
convenient for you to test the first urine of the day. It is important for you to use
the first urine after sleeping as this will contain the highest concentration of
hormones.
3. The Testing Window is set to run from 3 hours before the time you press the m
Button, to 3 hours after. The Clearblue® Easy Fertility Monitor will only request a
test during the Testing Window, so you must check the Monitor during this time to
see if you need to do a test that day. Please see example opposite.
4. At the start of each new cycle you can either press your m Button at the same
time as you did on your previous cycle to give you the same Testing Window, or if
you wish, you can change your Testing Window by setting the m Button at a
different time.
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 12
To Next Page
Loading...