8
4. Assembly Instructions - Continued
Removal and Height Adjustment:
1. Grip fixture center, move upward to release from pins.
2. Adjust height or remove the Tower.
Plugging in the Tower:
The plug is specially designed to be used in your Clearlight Sauna. There is an adapter cord available to
plug into 120v/15Amp household outlets.
Plug the tower into the available plug inside your sauna. It will either be located on the floor near the
front of your sauna or on the inside front wall of the sauna.
*When using The CORE Tower in your Clearlight Sauna, please refer to our sauna conversion chart to
see if your saunas electrical requirements need to be updated to accommodate the Core Red Light
Therapy tower.
To Next Page
Loading...