Clearlight RED LIGHT THERAPY - Assembly Instructions - Continued; Residential Applications; Commercial Applications; External Use Stand

9
4. Assembly Instructions - Continued
C. For Residential Applications: Activating the Power Outlet on Your Sauna Model
If your sauna keypad features an AUX buon, please follow these steps:
1. Plug the tower into the available plug inside your sauna, typically located on the floor near the
sauna’s front or on the inside front wall.
2. Power on the sauna.
3. Change the temperature display to Celsius by using the F/C buon.
4. Set the temperature to 50 degrees Celsius.
5. Press and hold the AUX buon for 5 seconds.
6. The outlet will now remain permanently on.
If your sauna keypad does not have an AUX buon, please follow these steps:
1. Plug the tower into the available plug inside your sauna, typically located on the floor near the
sauna’s front or on the inside front wall
2. Power on the sauna.
3. Simultaneously press and hold the Temp Up and Time Up buons for 5 seconds.
4. The floor plug is now activated, and you can turn on the light therapy tower.
D. For Commercial Applications: Please note that this operation activates the outlet for a single
30-minute session and needs to be repeated each time you want to use the Red Light.
E. How to activate power for sauna (Commercial Applications):
If your sauna keypad has an AUX buon on it, please follow these steps:
1. Plug the tower into the available plug inside your sauna, typically located on the floor near the
sauna’s front or on the inside front wall.
2. Power on the sauna.
3. Change the temperature display to Celsius using the F/C buon.
4. Set the temperature to 40 degrees Celsius
5. Hold the AUX buon for 10 seconds.
6. The floor plug is now activated, and you can turn on the light therapy tower for your 30-min session.
F. If you would like to use the Core out of the sauna, we have a stand available for additional purchase.