4. Using the included power supply, connect the CHAT 160 VC Breakout Box to a power outlet.
5. The blue LED indicators on the CHAT 160 illuminate, and the LED power indicator on the VC Breakout Box
illuminates, indicating that the CHAT 160 is powered and ready for use.
6. Next, connect the CHAT 160 to your PC (or USB device). This will allow you to use the CHAT software to
configure the CHAT 160 for use with your video conference system. Refer to Connecting the CHAT 160 to
a PC section at the end of this chapter.
Chapter 3: Configureing the CHAT 160
2211
To Next Page
Loading...
