93
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
Groups and channels
If a channel has an alpha value of “*”, the command is to be applied to all channels. For example, a group value
of M and a channel value of * would mean that the command is to be applied to all channels of group M (mic
inputs). The following table show the alpha representations for the different groups and the channels that are
available for each product.
Type and device IDs
Type ID Unit type Device ID range
4 PSR1212 0–7
5 XAP 800 0–7
6 XAP TH2 0–F
7 XAP 400 0–7
To Next Page
Loading...
