Clearwell Mobility Skipper - Disassembly

www.clearwellmobility.co.uk
6
Disassembly
Disassembly
You can disassemble the scooter into ve main pieces: the basket, the front section,
rear section, seat and battery box as shown:
Disassembly Procedure
1. Remove the basket- Stand in front of the scooter and lift basket directly upwards off
the basket bracket.
2. Remove the seat- Lift off the seat post while lifting the seat lever. A small rotation is
sometimes necessary to free the seat.
3. Remove the battery box- Undo the buttery catch as shown below. Remove the
battery box and stow carefully .
4. Fold down the tiller- Lower the tiller to its horizontal position and secure using the
knob. Lock the tiller steering.
5. Pull back the chassis release catch and gently separate the front chassis from the
rear.
NOTE: Ensure that all parts are secure and cannot move while being transported.
Buttery
Catch
Chassis
Release
Catch