EasyManua.ls Logo

Clearwell Mobility Skipper - Mobility Scooter Battery Charging; Charging Procedure and Indicators

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.clearwellmobility.co.uk
8
Charging Your Batteries
• Turn off the scooter power and remove
the key.
• Slide away the cover of the charger
outlet point positioned on the front of the
battery box as shown.
• Put the charger plug into the outlet
point. Do not switch on the battery
charger until all the plugs are in position.
• The LED light on the battery charger will
show amber when charging. The LED light
on the battery charger will show green
when the batteries are fully charged.
Battery Charging
• Once the battery has been fully charged, ret the protective cover to keep water out.
WARNING: Never attempt to open or disassemble the charger, risk of explosion and
electric shock if batteries are charged when incorrectly wired. Also, there is a risk of
electric shock and damage to the battery if it gets wet.
General Information
•Fully charge your travel scooters batteries 10-12 hours before using it for the rst
time. Charge the batteries daily after every discharge even after partly discharge.
• If the battery indicator has reached red, charge the batteries for 16 hours minimum,
ignoring the charge complete green LED.
• Even if the scooter is unused for a long period of time, the batteries should have a 24
hour charge once a week to ensure both batteries are fully charged.
EMI/RFI
All electrically powered vehicles, including scooters are susceptible to
Electromagnetic Interference / Radio Frequency Interference (EMI / RFI). This
interference could result in abnormal, unintended movement of your scooter. The FDA
has determined that each make and model of scooter can resist EMI / RFI to a certain
level. This product has been tested and has passed an immunity level of 20 V/m.

Related product manuals