Cleco DGD mPro400GC Quick Setup Guide

2 PL12EN-1004 2011-01 en00d451.fm, 02.02.2011
About this Quick Set-Up Guide
This quick set-up guide is the -- original Quick Set-Up Guide -- and is intended for all persons who configure
settings on the mPro400GC controller.
The quick set-up guide does the following:
• describes a quick and facile way to start-up and configure the mPro400GC controller.
• It provides important instructions for safe and effective operation.
The following documents provide additional information for the operation and service of the mPro400GC
controller.
• Programming manual, no. PL12EN-1001
• Recovery Installation
• Parts manual, no. PL12-1000EN
• System description, Fastening technology, no. P1730E
Disclaimer:
DGD reserves the right to modify, supplement or improve this document or the product without prior notice.
This document may not be reproduced in whole or in part in any way, shape or form, or copied to another
natural or machine-readable language or to a data carrier, whether electronic, mechanical, optical or other-
wise, without the express permission of DGD.
Symbols in the text:
italics Identifies menu items such as Diagnosis
> Identifies the selection of a menu item from the menu such as File > Print
<…> Identifies elements such as buttons, push button or external keyboard input, e. g. <F5>
Courier Identifies elements such as input fields, checkboxes, radio buttons or drop-down menus.
Indicates the name of paths and files, e. g. setup.exe
/ Separates the subdirectories of file paths, e. g. file/print
(OS9 operating system)
• Identifies lists
➔ Identifies instructions to be followed

Cleco DGD mPro400GC Specifications

General

Brand	Cleco
Model	DGD mPro400GC
Category	Controller
Language	English