Need help?Do you have a question about the Cleco mPro400GCD-M and is the answer not in the manual?
General| Brand | Cleco |
|---|---|
| Model | mPro400GCD-M |
| Category | Controller |
| Input Voltage | 100-240V AC |
| Power | 400 W |
| Frequency | 50/60 Hz |
| Storage Temperature | -20°C to 70°C |
| Protection | Overvoltage, Overcurrent, Short Circuit |
| Dimensions | 215 x 115 x 50 mm |
| Weight | 1.2 kg |
| Operating Temperature | 0°C to 50°C |
Covers general safety, intended use, and misuse scenarios for the controller.
Specifies requirements for personnel operating or adjusting the controller.
Details PPE needs and explains signal words/pictograms for hazards.
Explains product symbols and provides system-level safety instructions.
Addresses risks from dangerous movements, incorrect torque, unexpected starts, and safe operation.
Explains the use and behavior of secondary controllers with the primary controller.
Covers maintenance, cleaning, repair procedures, and proper disposal of components.
Describes the controller's role as a control and monitoring unit for tightening systems.
Specifies environmental operating and storage conditions for the controller.
Provides information on the controller's system functions, display, OS, and HMI.
Details the weight of the mPro400GCD-M controller.
Details serial, supply, and I/O connectors (X5, X6, X9, X10, X23).
Details TSnet and ArcNet system bus interface ports.
Details the CF card and optional SD card for system operation and data archiving.
Lists all items that should be included with the controller upon delivery.
To Next Page
