Cleco DGD mPro400GC Hardware Description

2 P2174HW-EN 2017-01 en00d451.fm, 12.01.2017
About this
Hardware Description
This Hardware Description is the -- original Hardware Description -- and is intended for all persons who are
connecting and installing the mPro400GC controller.
The Hardware Description does the following:
• describes all connections and its set-up.
The following documents provide additional information for the operation and service of the mPro400GC
controller.
• Recovery Installation
• Parts manual, no. PL12-1000EN
• System description, Fastening technology, no. P1730E
Disclaimer:
Apex Tool Group reserves the right to modify, supplement or improve this document or the product without
prior notice. This document may not be reproduced in whole or in part in any way, shape or form, or copied
to another natural or machine-readable language or to a data carrier, whether electronic, mechanical, opti-
cal or otherwise, without the express permission of Apex Tool Group.
DGD and Cleco are trademarks of the Apex Tool Group Division.
Symbols in the text:
italics Identifies menu items such as Diagnosis
> Identifies the selection of a menu item from the menu such as File > Print
<…> Identifies elements such as buttons, push button or external keyboard input, e. g. <F5>
Courier Identifies elements such as input fields, checkboxes, radio buttons or drop-down menus.
Indicates the name of paths and files, e. g. setup.exe
/ Separates the subdirectories of file paths, e. g. file/print
(OS9 operating system)
• Identifies lists
 Identifies instructions to be followed

Cleco DGD mPro400GC Specifications

General

Brand	Cleco
Model	DGD mPro400GC
Category	Controller
Language	English